Have a question?

Click the vest to contact us!

or give us a call at

1-(866) 400-5885

Chemicals & Powders

Joint sealers, expansion control, acrylic sealer for concrete sealing, epoxies, bonding agents, are all part of our vast inventory of Chemicals, Powders and Cementitious products. Each of our chemical and cementitious products link to our supplier’s information and provide you with in-depth information. If you are looking for a product which is not listed here, please give us a call.

PLANIBOND EBA – PART A

PLANIBOND EBA - PART A

High-Modulus Epoxy Bonding Agent

Planibond EBA is a two-component, multipurpose high-modulus epoxy bonding agent.Planibond EBA is nonshrink, 100%-solids and moisture-insensitive. Planibond EBA is used primarily as a bonding agent for screeds and repair mortars, with applications for anchoring and crack repair. Planibond EBA meets ASTM C881 requirements.

 MSDS PLANIBOND EBA – PART A

Mapecem QuickPatch

Mapecem QuickPatch

Interior/Exterior, Fast-Setting, High-Flow Concrete Patch

Mapecem Quickpatch   is a versatile, fast-setting, cementitious material used for the patching of interior/exterior concrete surfaces including concrete floors, driveways, sidewalks and concrete pads.  Mapecem Quickpatch   features extraordinary ease of placement, with a variable water ratio and outstanding workability. Light gray  Mapecem Quickpatch  can be applied from featheredge to 3” (7,5 cm) for ramping or filling. That makes it ideal for restoring weathered, damaged concrete surfaces to a uniform, superior wearing and better-than-new appearance.

When used for horizontal substrate repair before application of self-leveling underlayments,  Mapecem Quickpatch   sets fast for easy and cost-efficient repairs, minimizing job-site turnaround time.

 MSDS Mapecem QuickPatch

Concrete Renew

Concrete Renew

High-Performance, Fine-Grade Concrete Resurfacer

Concrete Renew Fine is a one-component, polymer-modified cementitious material for the resurfacing of existing concrete. It allows a variety of finishing options, including broom finishes and decorative trowel finishes, on sidewalks, driveways, steps and anywhere that has exposed concrete. Concrete Renew Fine features a natural light gray color that provides a uniform finish to concrete surfaces.

 MSDS Concrete Renew

Concrete Renew Fine

Concrete Renew Fine

High-Performance, Fine-Grade Concrete Resurfacer

Concrete Renew Fine is a one-component, polymer-modified cementitious material for the resurfacing of existing concrete. It allows a variety of finishing options, including broom finishes and decorative trowel finishes, on sidewalks, driveways, steps and anywhere that has exposed concrete. Concrete Renew Fine features a natural light gray color that provides a uniform finish to concrete surfaces.

 MSDS Concrete Renew Fine

Planitop 18

Planitop 18

Planitop 18 is a one-component, shrinkage-compensated, fast-setting, cementitious repair mortar with a corrosion inhibitor. Planitop 18 gains strength rapidly and is particularly suited for all interior/exterior horizontal concrete repairs, including bridge decks, parking-garage floors, and various horizontal DOT (Department of Transportation) concrete repairs from ½” to 2” (12mm to 5 cm) thickness applied neat and up to 8” (20 cm) extended. Planitop 18 features exceptional durability and very low chloride permeability rating.

Trade name Planitop 18

 MSDS Planitop 18

 

Tilt Finish

tilt-finish

Tilt Finish is a versatile, fast-setting, polymer-modified material utilizing a proprietary blend of cements and extremely fine aggregate. Tilt Finish is ideal for producing a smooth finish on concrete surfaces including tilt wall, poured-in-place concrete, masonry, pre-cast beams and columns. Tilt Finish features extraordinary ease of placement, with a variable water ratio and outstanding workability.

Light gray Tilt Finish can be applied from featheredge, up to ½” (12mm) in confined areas. Ease of placement makes it ideal for covering imperfections in concrete surfaces, providing a uniform and light gray appearance, or a smooth surface before painting or application of coating.

Trade name Tilt Finish

 MSDS Tilt Finish

 

1707 Resolve

1707 Resolve

INNOVATIVE MANUFACTURING INC®

Product Description
Resolve is a blend of specially selected solvents for re-dissolving Innovative Mfg. solvent based acrylic sealers.

 MSDS 1707 Resolve

Verticoat

Verticoat

VERTICOAT is a polymer-modified cementitious mortar for vertical/overhead concrete and masonry repairs. It sets rapidly to allow quick, easy repairs of concrete surfaces both interior and exterior. VERTICOAT is a two-component mortar designed for trowel applied repairs.

Packaging/yield
VERTICOAT is packaged in a pail containing a 54 lb (24 kg) pail of dry powder and 1gal (3.8 L) of VERTICOAT LIQUID. Additionally, the powder is available in a 54 lb (24 kg) bag and mixed with 1gal (3.8 L) of the liquid, that is sold separately. Yield: 0.48 ft3 (0.014 m3) per kit.

Trade name Verticoat

 MSDS VERTICOAT

 

VersaSpeed

VersaSpeed

VERSASPEED is a versatile, single-component, rapid-setting repair mortar for horizontal, and form and pour repair projects. Requiring only the addition of water, VERSASPEED is a low shrinkage, high early strength material that is easy to use with an accelerated set time for fast turn-around projects. Repaired areas may be open to standard tire traffic after 2 hours following the final set and an epoxy coating can be applied after 4 hours. VERSASPEED is similar in appearance to concrete and is suitable for use in repairing concrete surfaces from approximately 1/4″ to 6″ (6 mm to 15.2 cm) in thickness.

Packaging/yield
VERSASPEED is packaged in 50 lb (22.7 kg) bags. Yield: 0.37ft³ (0.01m³) per bag when mixed with 0.42 gal (1.6 L) of water. VERSASPEED may be extended with up to 25 lb (11.4 kg) of clean, SSD, 3/8″ (9.5 mm) pea gravel. Approximate Extended Yield: 0.52 ft³ (0.0147 m³) per bag.

Trade name VERSASPEED

 Brochure: VERSASPEED

 

DURAL 50 3:1 PART B

DURAL 50 is a 100% solids, two component acrylated epoxy resin formulation designed to penetrate concrete and seal it from the ingress of chlorides and water. DURAL 50 heals hairline cracks through its penetration.

 MSDS DURAL 50 3:1 PART B

DURAL 50 3:1 PART A

DURAL 50 is a 100% solids, two component acrylated epoxy resin formulation designed to penetrate concrete and seal it from the ingress of chlorides and water. DURAL 50 heals hairline cracks through its penetration.

 MSDS DURAL 50 3:1 PART A

SUPER DIAMOND CLEAR TB

SUPER DIAMOND CLEAR TB

SUPER DIAMOND CLEAR TB is a state-of-the-art concrete curing compound and cure & seal specially designed with a high solids formulation to provide the most efficient moisture retention for proper cement hydration and strength gain as well as protection from liquids, weathering and abrasion. SUPER DIAMOND CLEAR TB is particularly well suited for exterior architectural concrete where membrane yellowing is undesirable. SUPER DIAMOND CLEAR TB is formulated with a unique exempt solvent blend that gives this product all the performance benefits of traditional solvent based curing and sealing products while ensuring compliance with VOC laws in regulated areas.

Packaging
SUPER DIAMOND CLEAR TB is packaged in 55 gal (208 L) drums and 5 gal (18.9 L) pails.

Trade name SUPER DIAMOND CLEAR TB

 MSDS SUPER DIAMOND CLEAR TB

 

EUCOBAR

EUCOBAR

EUCLID CHEMICAL®

EUCOBAR is designed to be used as an evaporation retardant on concrete surfaces of all types. When sprayed over fresh concrete, EUCOBAR forms a thin, continuous film which prevents rapid moisture loss from the concrete surface. It is easy to use requiring only the addition of water before spray application. EUCOBAR is especially effective when concreting operations must be performed in direct sun, wind, high temperatures, or low relative humidity.

Technical Information
EUCOBAR is a water based polymer concentrate that is readily dilutable in water.
Evaporation rate is a function of relative humidity, concrete temperature, air temperature and wind velocity. Plastic shrinkage cracking is a strong possibility when the rate of evaporation exceeds 0.2 lb/ft2/hr (1.0 kg/m2/hr). The chart on the back of this page (Fig. 2.1.5 of ACI 305, Hot Weather Concreting) is useful in determining the evaporation rate under a given set of jobsite conditions. Use EUCOBAR when the above limit is exceeded.
Appearance: EUCOBAR is a free flowing pink liquid designed to be mixed with water. The use of EUCOBAR will not affect the color of concrete.

Packaging
EUCOBAR is packaged in 55 gal (208 L) drums, 5 gal (18.9 L) pails and 6/1 gal (3.8 L) units per case.

Trade name EUCOBAR

 MSDS EUCOBAR

 

EUCO-SPEED MP

EUCO-SPEED MP

Euco-Speed MP is a rapid setting, very rapid hardening magnesium phosphate material for patching and repair of concrete and masonry surfaces. EUCO-SPEED MP requires only the addition of water and can be installed with standard tools, equipment and procedures. It bonds tenaciously to properly prepared concrete and provides a durable patch which is resistant to freeze/thaw cycling and deicing salts. For temperatures above 85oF (29oC), EUCO-SPEED MP Hot Weather should be used. For large placements use EUCO-SPEED MP HOT WEATHER extended with pea gravel.

Packaging/yield
EUCO-SPEED MP is available in 50 lb (22.7 kg) bags or pails. Yield: Approximately 0.42 ft3 (0.012 m3) of mortar when mixed with 0.45 gal (1.7 L) of water. For areas deeper than 1” (25.4 mm), EUCO-SPEED MP must be extended with up to 30 lb (13.6 kg) of 3/8” (9.5 mm) pea gravel*. Yield will increase to approximately 0.57 ft3 (0.016 m3) per unit.* Use only dust free, properly graded hard aggregate. Never extend EUCO-SPEED MP with limestone or aggregate containing limestone.

Trade name EUCO-SPEED MP

 MSDS EUCO-SPEED MP

 

DURAL 365 PART A

DURAL 365 is a fast setting, non-sag polyester doweling adhesive for concrete, masonry, brick, and stone applications. DURAL 365 has a high compressive modulus and strength, can be used in damp conditions, and can be installed at temperatures as low as 20°F (-7°C) and up to 120°F (49°C). In addition, DURAL 365 has a short bolt-up time of just one hour at 75°F (24°C).

 MSDS DURAL 365 PART A

DIAMOND CLEAR – 55 GAL DRUM

DIAMOND CLEAR - 55 GAL DRUM

DIAMOND CLEAR is a state-of-the-art curing and sealing compound, specially designed to provide a quality cure and seal while assuring total resistance to yellowing from ultraviolet exposure. DIAMOND CLEAR is particularly well suited for curing and sealing exterior architectural concrete where membrane yellowing is undesirable.

• Seals all concrete surfaces providing a glossy appearance and easier clean-up
• Improves new concrete by promoting a proper cure and development of a strong surface
• Dustproofs concrete with a tough durable film
• Will not yellow under ultraviolet exposure

 MSDS DIAMOND CLEAR – 55 GAL DRUM

VERSASPEED

VERSASPEED

VERSASPEED is a versatile, single-component, rapid-setting repair mortar for horizontal, and form and pour repair projects. Requiring only the addition of water, VERSASPEED is a low shrinkage, high early strength material that is easy to use with an accelerated set time for fast turn-around projects. Repaired areas may be open to standard tire traffic after 2 hours following the final set and an epoxy coating can be applied after 4 hours. VERSASPEED is similar in appearance to concrete and is suitable for use in repairing concrete surfaces from approximately 1/4” to 6” (6 mm to 15.2 cm) in thickness.

 MSDS VERSASPEED

EUCO 700 BLACK PART A

EUCO 700 BLACK PART A

Semi-Rigid Industrial Floor Joint Filler.  EUCO 700 is a two component, semi-rigid epoxy for filling control and construction joints in industrial concrete floors This product supports the joint edges and reduces spalling of the edges caused by wheel traffic.

CLICK HERE

EUCOBAR – 55 GAL DRUM

EUCOBAR - 55 GAL DRUM

Evaporation Retardant.  EUCOBAR is designed to be used as an evaporation retardant on concrete flatwork of all types.

 MSDS EUCOBAR – 55 GAL DRUM

PLANITOP X

PLANITOP X

Planitop X is a one-component, shrinkage-compensated, fast-setting, polymer-modified, high-build cementitious repair mortar. It is suited for all vertical, overhead and horizontal concrete applications, including precast/prestressed, tilt-up, post-tensioned and cast-in-place concrete. Planitop X can be applied in thicknesses of featheredge to 4″ (0 to 10 cm) per lift.

 MSDS PLANITOP X

PLANIPATCH

PLANIPATCH

Planipatch is an ultra fast-drying, self-curing, polymer-modified, cement-based patching compound that rapidly develops high compressive strength. When

Planipatch is mixed with Planipatch Plus, the Planipatch Plus System can be used as an embossing leveler or as a patch to fill voids over properly prepared vinyl sheet goods, vinyl composition tile (VCT) and cement terrazzo before the direct glue-down installation of floor coverings.

 MSDS PLANIPATCH

 

Planicrete AC

Planicrete AC

Planicrete AC is a one-component, concentrated liquid latex admixture used to enhance the performance of cementitious repair mortars, plasters, stuccos, concrete mixes and toppings for the restoration of horizontal, vertical and overhead concrete; concrete masonry units (CMU); and masonry surfaces.

 MSDS PLANIPATCH AC

Planibond JF – Part A

Planibond JF - Part A

Semi-rigid epoxy joint filler

Planibond JF is a two-part, 100%-solids, moisture-tolerant, semi-rigid epoxy joint filler. Planibond JF meets ASTM C881 and ACI 302 requirements as well as USDA specifications for food-processing areas. The self-leveling Planibond JF is ideal for filling and sealing horizontal non-moving saw-cut control joints and random cracks.

 MSDS Planibond JF – Part A

Planigrout 712

Planigrout 712

Planigrout 712 is a one-component, nonshrink, nonmetallic, cement-based DOT (Department of Transportation) grout that meets CRD C and ASTM C1107 standards. Planigrout 712 contains a corrosion inhibitor and silica fume, as well as special blend of fine aggregate and plasticizers that provide exceptional placing and performance characteristics.

Trade name Planigrout 712

 MSDS Planigrout 712

 

Novaplan 2 Plus

novaplan 2plus

Novaplan 2 Plus is a high-strength, self-leveling cement-based underlayment and repair mix with quicker quicker curing time, for interior concrete and engineer-approved floors.

  • For leveling, smoothing and repairing interior floors
  • Ready for tie in 24 hours

Trade name Novaplan 2 Plus

 MSDS Novaplan 2 Plus

 

EVERCLEAR VOX

EUCO QWIKJOINT UVR

EVERCLEAR VOX is a water based pure acrylic sealer for concrete with excellent blush resistance and total resistance to yellowing from UV exposure. This sealer imparts an attractive, low gloss and protection to all concrete surfaces, and is especially suited for decorative concrete. Formulated with a very low VOC content, EVERCLEAR VOX is compliant with all VOC regulations in the United States and Canada and its low odor makes it usable indoors or out. EVERCLEAR VOX dries to a clear, matte finish, but a higher gloss can be achieved with additional coats.

Packaging EVERCLEAR VOX is packaged in 55 gal (208 L) drums, 5 gal (18.9 L) pails and 6/1 gal (3.8 L) units per case.

Trade name EVERCLEAR VOX

 MSDS EVERCLEAR VOX

 

EUCO QWIKJOINT UVR

EUCO QWIKJOINT UVR

EUCO QWIKJOINT UVR represents a new generation of polyurea technology with features and benefits unlike any other polyurea joint filler on the market. EUCO QWIKjoint UVR resists fading from ultraviolet light greater than any existing product. It is a fast-setting, semi-rigid polyurea, primarily used for filling construction and control joints in industrial and commercial concrete floors.

EUCO QWIKjoint UVR can be shaved flush with the floor shortly after placement or up to 24 hours later. EUCO QWIKjoint UVR supports and protects joint edges from heavy loads and wheel traffic, reducing spalling of the joint edges. EUCO QWIKjoint UVR is available in 33 standard colors and in a Neutral Base, that can be colored on site with EUCLID UNIVERSAL COLOR PACKS; available in the same 33 colors.

Packaging DURALPREP A.C. is packaged in 3.75 gal (14.2 L) kits and 2/1 gal (3.8 L) units/case.

Trade name EUCO QWIKJOINT UVR

 MSDS EUCO QWIKJOINT UVR

 

DURALPREP AC

DURALPREP A.C.

DURALPREP A.C. is a three component, pre-proportioned, water based epoxy modified portland cement bonding agent and anti-corrosion coating. DURALPREP A.C. is used as a bonding agent for placing fresh concrete to existing concrete and for repair and restoration of concrete surfaces. DURALPREP A.C. contains a corrosion inhibitor which protects reinforcement when used as an anti-corrosion coating for steel. DURALPREP A.C. has a long open time, is non flammable, VOC compliant, and does not form a water vapor barrier after cure.

Packaging DURALPREP A.C. is packaged in 3.75 gal (14.2 L) kits and 2/1 gal (3.8 L) units/case.

Trade name DURALPREP AC

 MSDS DURALPREP AC

 

DRY SHAKE FLOOR HARDENERS

DRY SHAKE FLOOR HARDENERS

Mineral and metallic dry shake hardeners provide additional abrasion resistance for high wear industrial, commercial and industrial concrete floors.

 MSDS DRY SHAKE FLOOR HARDENERS

DURALPREP AC PART A

surflex-natural

DURALPREP A.C. is a three-component bonding agent and anti-corrosion coating for reinforcing steel. It is a pre-proportioned kit that contains a water-based epoxy, combined with portland cement that can be used as a bonding agent for placing fresh concrete and repair mortars to existing concrete substrates. DURALPREP A.C. contains a corrosion inhibitor which protects reinforcement when used as an anti-corrosion coating for steel. DURALPREP A.C. has a long open time, is non-flammable, VOC compliant, and does not form a water vapor barrier after cure.

Features/Benefits

  • Long open time
  • Contains a corrosion inhibitor
  • Ease of application (brush/spray)

Applications

  • Bonding agent for fresh concrete to existing concrete
  • Concrete repairs with cement or epoxy mortars
  • Anti-corrosion coating for steel reinforcement
  • Exterior or interior
  • On grade or above grade applications

 MSDS DURALPREP AC PART A

QWIKJOINT UVR 1:1 PART A

QWIKJOINT UVR 11 PART A

EUCO QWIKJOINT UVR represents a new generation of polyurea technology with features and benefits unlike any other polyurea joint filler on the market. EUCO QWIKjoint UVR resists fading from ultraviolet light greater than any existing product. It is a fast-setting, semi-rigid polyurea, primarily used for filling construction and control joints in industrial and commercial concrete floors. EUCO QWIKjoint UVR can be shaved flush with the floor shortly after placement or up to 24 hours later. EUCO QWIKjoint UVR supports and protects joint edges from heavy loads and wheel traffic, reducing spalling of the joint edges

  • Unparalleled UV resistance
  • Fast setting formula reduces downtime
  • Large shave-time window allows for greater flexibility in scheduling joint filling operations
  • Tough performance reduces floor joint repairs and maintenance
  • Suitable for filling cracks in older floors to reduce the rate of joint deterioration
  • Will cure in temperatures as low as -20° F (-29°C)
  • Less moisture-sensitive than standard polyureas

 MSDS QWIKJOINT UVR 1:1 PART A

EVERCLEAR VOX – 5 GAL PAIL

surflex-natural

EVERCLEAR VOX is a water-based pure acrylic sealer for concrete with excellent blush resistance and total resistance to yellowing from UV exposure. This sealer imparts an attractive, low gloss and protection to all concrete surfaces, and is especially suited for decorative concrete. Formulated with a very low VOC content, EVERCLEAR VOX is compliant with all VOC regulations in the United States and Canada and its low odor makes it usable indoors or out. EVERCLEAR VOX dries to a clear, matte finish, but a higher gloss can be achieved with additional coats.

  •  Non-yellowing, medium gloss sealer provides protection and improved appearance to concrete
  • Low odor
  • Complies with all U.S. EPA and local VOC regulations, including OTC, LADCO, Maricopa County, and California (CARB and SCAQMD)
  • Excellent abrasion and blush resistance
  • Can be applied over previous coats of sealers – water based and solvent based
  • Excellent recoatability
  • Can contribute to LEED points (EQ Credit 4.2)

 MSDS EVERCLEAR VOX – 5 GAL PAIL

Surflex Natural

surflex-natural

SURFLEX is a quartz-silica mixture of finely graded non-metallic aggregates, plasticizer and cement binder. It is an economical concrete floor hardener recommended for both interior and exterior use. It is particularly valuable because of its non-rusting characteristics when floors will be frequently wet. SURFLEX is available in eight non-fading colors as well as natural.

Features/Benefits

  • Hardens concrete in one economical operation
  • Use of hard and properly graded aggregates increases the wear resistance over plain concrete floors
  • Ready-to-use factory blend eliminates messy and expensive job mixing and minimizes errors
  • Non-rusting materials make it possible to use SURFLEX outdoors as well as indoors
  • Eucon dispersing agent contained in SURFLEX makes it possible to incorporate SURFLEX into the surface of low slump concretes resulting in exceptionally high surface strengths for maximum wear resistance

Applications

  • Lobbies and waiting rooms of commercial and public buildings
  • Corridors and washrooms in institutional and public buildings
  • Auto showrooms and service centers
  • Factory and warehouse floors
  • Commercial and industrial facilities
  • Restaurants and dairies

Specifications/Compliances
Canadian Food Inspection Agency

 MSDS Surflex Natural

Bonding Agents

Planibond® EBA
High-Modulus Epoxy Bonding Agent

Planibond EBA is a two-component, multipurpose high-modulus epoxy bonding agent. Planibond EBA is nonshrink, 100%-solids and moisture-insensitive. Planibond EBA is used primarily as a bonding agent for screeds and repair mortars, with applications for anchoring and crack repair. Planibond EBA meets ASTM C881 requirements.

Planicrete® AC
Acrylic Latex Admixture for Mortar and Concrete

Planicrete AC is a one-component, concentrated liquid latex admixture used to enhance the performance of cementitious repair mortars, plasters, stuccos, concrete mixes and toppings for the restoration of horizontal, vertical and overhead concrete; concrete masonry units (CMU); and masonry surfaces.

For more information CLICK HERE

 

Primer L™
Advanced-Technology Acrylic Latex Primer for Concrete

Primer L (formerly Ultraprime L) is a concentrated, solvent-free acrylic primer used prior to the installation of underlayments and topping materials. It is green for easy identification. It improves the bond between a properly prepared and profiled concrete substrate, and self-leveling underlayment or topping materials. This product is solvent-free.

For more information CLICK HERE

 

SpecWeld

A ready to use, rewettable polyvinyl acetate (PVA) emulsion which bonds new concrete, underlayments, masonry, stucco, terrazzo and Portland cement/sand mixes to horizontal and vertical concrete or other sound surfaces,  Complies with ASTM C-1059, Type 1

For more information CLICK HERE

 

Dural Prep AC

Bonding Agent and Anti-Corrosion Coating for Reinforcement.  DURALPREP A.C. is a three component, pre-proportioned, water based epoxy modified portland cement bonding agent and anti-corrosion coating.

For technical data CLICK HERE
For MSDS CLICK HERE

 

Dural 50

Ultra Low Viscosity Acrylated Epoxy.  DURAL 50 is a 100% solids, two component acrylated epoxy resin formulation designed for slab sealing and crack grouting.

For technical data CLICK HERE
For MSDS part 1 CLICK HERE and for part 2 CLICK HERE

 

LeveLayer Bonding Agent J-42
Level Primer J42 is a concentrated re-emulsifiable primer designed to be used with the Dayton Superior Levelayer, Econolevel and Level Topping products. Level Primer J42 works as both a sealer to help prevent pinholes in floor leveling materials and as a bonding agent to ensure good adhesion.

For more information CLICK HERE

 

Release Agents

SpecStrip
A chemically active release agent specifically engineered to positively prevent bonding of concrete to forms and form liners.  SpecStrip does NOT contain any waxes or silicones.

For more information CLICK HERE

 

SpecStrip Plus
A premium, chemically active release agentspecially engineered topositively prevent bonding of concrete to forms and form liners.  SpecStrip Plus does NOT contain diesel, kerosene, wax or silicone.

For more information CLICK HERE

 

Clean Strip™ J1A
Clean Strip™ J1A is a V.O.C. compliant, ready-to-use, petroleum based, chemically reactive concrete form release. Clean Strip™ J1A effectively prevents bonding of concrete to forms and formliners. Use of Clean Strip™ J1A regularly will increase the life of all forms.

For technical data CLICK HERE 
For MSDS  CLICK HERE

 

Clean Strip™ Ultra J3
Clean Strip™ Ultra J3 is a premium, low odor, ready-to-use, chemically reactive form release that is V.O.C. compliant in all regulatory regions. It is ideal for architectural and precast concrete and for general forming applications. Clean strip™ Ultra J3 works to ensure clean, positive release of plywood, fiberglass, aluminum, steel and other concrete forming materials. Clean Strip™ Ultra J3 prolongs the life of plywood forms, and acts to reduce rusting of steel forms. Properly applied, Clean Strip™ Ultra J3 is non-staining, reduces the number of surface air voids (bugholes) and will not interfere with the adhesion of subsequent coatings.

For technical data CLICK HERE
For MSDS CLICK HERE 

 

Cleaners & Degreasers

Citrus Cleaner
Citrus Cleaner is designed for stripping, degreasing and cleaning all types of concrete. Is is ideal for concrete floor applications when it is necessary to remove dirt, tire marks, oil spills, grease and other contaminants. Citrus Cleaner will also strip most curing compounds. It is an ideal application for warehouses, industrial plants, food processing plants, automotive plants, parking garages, plazas and service stations.

For technical data CLICK HERE

 

Orange Peel – Citrus Cleaner
A cost effective, natural citrus solvent cleaner and degreaser.  An innovative solution for the toughest industrial applications.  Citrus Cleaner will effectively remove grease, grime, and other contaminants from architectural concrete and other surfaces.

For more information CLICK HERE

 

Xylene
A clear, flammable, high strength solvent formulated specially as a thinner and clean-up material for acyrlics and resin based compounds. Xylene has a greater solvency strength (KB value) than solvent 100.

For more information CLICK HERE

 

1707 Resolve
Resolve is used for removing blotching and whitening problems that occur on concrete with excess moisture content. Resolve works by re-dissolving the acrylic and driving it into the concrete leaving a surface ready for re-application of Innovative Mfg. solvent based acrylic sealers.  Mfg by Innovative Manufacturing.

For product data CLICK HERE
For MSDS CLICK HERE

 

Concrete Grouts

Planigrout® 712
Cement-Based, General-Purpose  Construction Grout

Planigrout 755 is a one-component, nonshrinking, cementitious construction grout consisting of selected fine aggregates and special additives. Planigrout 755 requires only the addition of water to produce consistencies varying from dry pack to flowable. It produces excellent compressive and flexural strengths within a few days.

For more information CLICK HERE

 

Planigrout 755
Cement-Based, General-Purpose  Construction Grout

Planigrout 755 is a one-component, nonshrinking, cementitious construction grout consisting of selected fine aggregates and special additives. Planigrout 755 requires only the addition of water to produce consistencies varying from dry pack to flowable. It produces excellent compressive and flexural strengths within a few days.

For more information CLICK HERE

 

Planigrout 830 SP
High-Performance, Three-Part Epoxy Machine Base Grout

Planigrout 830 SP  is a three-part, 100%-solids, high-performance precision machine grout for the support of heavy equipment.  Planigrout 830 SP  utilizes an engineered blend of graded aggregate combined with epoxy resins that produces a grout with exceptional flow and void-filling capability.  Planigrout 830 SP  is chemically resistant and features an exceptionally homogenous distribution of aggregate. This makes it ideal for grouting base plates exposed to the dynamic loading and continuous vibration produced by heavy industrial equipment.

For more information CLICK HERE

Read our post on Cold Weather Grouting and Repair.

 

Rapid Resin Repair

Rapid Resin Repair is a 100% solids, low modulus, three-component, all weather, non-shrinking epoxy/urethane hybrid concrete repair and patching  material. Rapid Resin Repair utilizes 100% solids epoxy/urethane technology along with specialty graded aggregates for achieving rapid turn around concrete repairs in all weather conditions.

For technical data CLICK HERE

 

Concrete Coating and Skim Coating Compounds

Mapecem Quickpatch
Interior/Exterior, Fast-Setting, High-Flow Concrete Patch

Mapecem Quickpatch   is a versatile, fast-setting, cementitious material used for the patching of interior/exterior concrete surfaces including concrete floors, driveways, sidewalks and concrete pads.  Mapecem Quickpatch   features extraordinary ease of placement, with a variable water ratio and outstanding workability. Light gray  Mapecem Quickpatch  can be applied from featheredge to 3” (7,5 cm) for ramping or filling. That makes it ideal for restoring weathered, damaged concrete surfaces to a uniform, superior wearing and better-than-new appearance. When used for horizontal substrate repair before application of self-leveling underlayments,  Mapecem Quickpatch   sets fast for easy and cost-efficient repairs, minimizing job-site turnaround time.

For more information CLICK HERE

 

Tilt Finish
Professional finishing compound for concrete surfaces

Tilt Finish  is a versatile, fast-setting, polymer-modified material blending calcium aluminate and Portland cement.  Tilt Finish  is ideal for producing a smooth finish on concrete surfaces including tilt wall, poured-in-place concrete, masonry, pre-cast beams and columns.  Tilt Finish  features extraordinary ease of placement, with a variable water ratio, extended pot life and outstanding workability. Light gray  Tilt Finish  can be applied from featheredge, up to 1/2″ (12 mm) in confined areas and up to 1/8″ (3 mm) over large surface areas. Ease of placement makes it ideal for covering imperfections in concrete surfaces, providing a uniform, light gray appearance, or a smooth surface before painting or application of coating.

For more information CLICK HERE

 

 

Concrete Renew Fine
High-Performance, Fine-Grade Concrete Resurfacer

Concrete Renew Fine is a one-component, polymer-modified cementitious material for the resurfacing of existing concrete. It allows a variety of finishing options, including broom finishes and decorative trowel finishes, on sidewalks, driveways, steps and anywhere that has exposed concrete. Concrete Renew Fine features a natural light gray color that provides a uniform finish to concrete surfaces.

For more information CLICK HERE

 

Concrete Renew

Concrete Renew is a one-component, polymer-modified cementitious material for the resurfacing of existing concrete. It is suitable for broom finishes and decorative trowel finishes on sidewalks, driveways, steps and anywhere that has exposed concrete. Concrete Renew features a natural light gray color that provides a uniform, like-new look to concrete surfaces.

For more information CLICK HERE

 

Starpatch Slab & Panel Patch

Starpatch Slab and Panel Patch  is a  fast  drying  repair  compound  that  can  be  used interior  or  exterior,  vertically  or  horizontally.    Slab and Panel Patch mixes with water to a smooth and creamy consistency.  It can be used to fill in spalls, gouges,  cracks,  dents,  chips,  bug  holes,  honey combs,  off  set  joints  as  well  as  skim  coating  to  a true feather edge.

For more information CLICK HERE

Sure Finish
Sure Finish™ is a trowel applied, highly polymer modified, cement based, rapid setting underlayment. It provides an exceptionally smooth, true “feather finish” to a wide variety of substrates, including wood, concrete, ceramic and existing resilient flooring. Sure Finish™ can also be used indoors to repair damaged concrete wall surfaces and on exterior concrete walls that are to be coated.

For more information CLICK HERE

 

Concrete Repair Mortars

Planitop X
Fast-Setting Horizontal, Vertical and Overhead One-Component Repair Mortar

Planitop X is a one-component, shrinkage-compensated, fast-setting, polymer-modified, high-build cementitious repair mortar with a corrosion inhibitor. It is suited for all interior/exterior vertical, overhead and horizontal concrete applications, including precast/prestressed, tilt-up, post-tensioned and cast-in-place concrete. Planitop X can be applied in thicknesses of featheredge to 4″ (0 to 10 cm) per lift. Planitop X is engineered with MAPEI’s Easy Glide Technology™ for ease of application and is light gray to match existing concrete surfaces.

For more information CLICK HERE

 

Planitop 18
Fast-Setting, Flowable, One-Component Repair Mortar

Planitop 18 is a one-component, shrinkage-compensated, fast-setting, cementitious repair mortar that is suited for all interior/exterior horizontal concrete repairs, including bridge-deck overlays, parking-garage floor repairs and various horizontal DOT concrete repairs.

For more information CLICK HERE

 

Versaspeed

Rapid Setting Repair Mortar.  VERSASPEED is a versatile, one part, rapid setting patching and repair compound for horizontal, form and pour repair projects. VersaSpeed repairs can be coated with epoxy in 4 hours in 70ºF (21ºC) environments.

For technical data CLICK HERE
For MSDS CLICK HERE

 

Eucospeed MP

Magnesium phosphate patching mortar.  EUCO-SPEED MP is a rapid setting, very rapid hardening magnesium phosphate material for patching and repair of concrete and masonry surfaces. EUCO-SPEED MP requires only the addition of water and can be installed with standard tools, equipment and procedures. It bonds tenaciously to properly prepared concrete and provides a durable patch which is resistant to freeze/thaw cycling and deicing salts. For temperatures above 85ºF (29ºC), EUCO-SPEED MP Hot Weather should be used. For large placements use EUCO-SPEED MP HOT WEATHER extended with pea gravel.

For technical data CLICK HERE
For MSDS CLICK HERE

 

Vericoat

Trowel Grade Vertical / Overhead Concrete Repair Mortar.  VERTICOAT is a polymer modified cementitious mortar for vertical and overhead concrete and masonry repairs. It sets rapidly to allow quick, easy repairs of concrete surfaces both inside and outside. VERTICOAT is a two component mortar designed for trowel applied repairs.

For technical data CLICK HERE
For MSDS CLICK HERE

 

Rapid Set® Cement All™

Concrete Repair – Fast Setting, High-Strength, Non-Shrink Grout

CTS Rapid Set Cement All is a high early strength cement that can be used for most concrete repair job. Cement All can be used for various applications including concrete crack repairs, grouting, road repairs, concrete spalling repairs and concrete restoration to name a few.

For more information CLICK HERE
MSDS: PDF


Rapid Set® Mortar Mix

Concrete Repair Product – Mortar Mix is fast setting, high strength

For more information CLICK HERE
MSDS: PDF

Rapid Set® Concrete Mix

Fast Setting Concrete Repair, Fast Setting Mix

For more information CLICK HERE
MSDS: PDF

Concrete Self-Leveling and Underlayment

Ultraplan 1 Plus
High-Performance, Quick-Setting, Self-Leveling Underlayment

Ultraplan 1 Plus is an HCT™ (High-Hydrated Cement Technology)-based, quick-setting, self-leveling, self-drying underlayment and repair mix for interior concrete and engineer-approved floors. Ultraplan 1 Plus has high strength and is abrasion-resistant, able to withstand light foot traffic after 2 to 3 hours and vehicular rubber-wheel traffic after 3 days.

For more information CLICK HERE

 

Ultraplan M20 Plus
Quick-Setting, High-Compressive-Strength Underlayment

Ultraplan M20 Plus is an HCT™ (High-Hydrated Cement Technology) calcium-aluminate-based, quick-setting self-leveling, self-drying material. It is specially formulated for the resurfacing and construction of interior horizontal surfaces as a high-compressive-strength underlayment with maximum resistance to wheel tracking and indentations experienced in softer underlayments. Ultraplan M20 Plus is suitable for use as a commercial wear topping in warehouse and alternate industrial applications where an exceptional flat and smooth concrete surface is desired.

For more information CLICK HERE

 

Novoplan 2 Plus
Professional Self-Leveling Underlayment

Novoplan 2 Plus is a high-strength, self-leveling cement-based underlayment and repair mix with quicker curing time, for interior concrete and engineerapproved floors.

For more information CLICK HERE

 

Planipatch

Fast-Setting, Polymer-Modified, Cement-Based Patching Compound

Planipatch is an ultra fast-drying, self-curing, polymer-modified, cement-based patching compound that rapidly develops high compressive strength. Use for smoothing, patching and filling cracks, holes, voids and depressions in concrete and approved wood underlayments prior to the installation of floor coverings. Floor coverings can be installed just 1 hour after application. Mix with Planipatch Plus™ to use as an embossing leveler or patch over properly prepared vinyl sheet goods, vinyl composition tile (VCT), cement terrazzo and residual cutback adhesive surfaces .

This product includes High-Hydrated Cement Technology (HCT™).

For more information CLICK HERE

 

LeveLayer Bonding Agent J-42
Level Primer J42 is a concentrated re-emulsifiable primer designed to be used with the Dayton Superior Levelayer, Econolevel and Level Topping products.  Level Primer J42 works as both a sealer to help prevent pinholes in floor leveling materials and as a bonding agent to ensure good adhesion.

For more information CLICK HERE

 

LeveLayer
Dayton Superior LeveLayer® is a cement based, nonshrink, self-leveling floor underlayment designed for interior use. The LeveLayer® provides a smooth subfloor that typically will accept floor coverings in as little as 14 hours after installation. Just mix LeveLayer® with water, pour or pump, and it will seek its own level to produce a smooth, flat, hard surface.

For more information CLICK HERE

 

EconoLevel
Econolevel™ is a cement based, non-shrink, self-leveling interior floor underlayment that only requires the addition of water to produce a flowable mixture that can be poured or pumped onto the floor. Econolevel™ is not a gypsum based product.

For more information CLICK HERE

 

Level Topping EXT
Level Topping™ Exterior is a premium cement based, nonshrink, self-leveling topping designed for leveling horizontal concrete. Level Topping™ Exterior only requires the addition of water to produce a flowable mixture that can be poured or pumped onto the floor. Level Topping™ is not a gypsum based product.

For more information CLICK HERE

 

Sure Finish™
Sure Finish™ is a trowel applied, highly polymer modified, cement based, rapid setting underlayment. It provides an exceptionally smooth, true “feather finish” to a wide variety of substrates, including wood, concrete, ceramic and existing resilient flooring. Sure Finish™ can also be used indoors to repair damaged concrete wall surfaces and on exterior concrete walls that are to be coated.

For more information CLICK HERE

Expansion & Control Joints

Planibond® JF
Semi-rigid epoxy joint filler

Planibond  JF  is a two-part, 100%-solids, moisture-tolerant, semi-rigid epoxy joint filler.  Planibond JF  meets ASTM C881 and ACI 302 requirements as well as USDA specifications for food-processing areas. The self-leveling  Planibond  JF  is ideal for filling and sealing horizontal non-moving saw-cut control joints and random cracks.

For more information CLICK HERE

 

THC 900/901 – Multi-Component Polyurethane Sealant for Horizontal Expansion Joints
Tremco THC-900 and 901 are multi-component, chemically-curing polyurethane joint sealants that include a tintable base, curative packet, and a choice of 70 standard colors. These sealants can be catalyzed to cure faster for time-sensitive projects and cold weather.

For more information CLICK HERE

 

Dymeric® 240 – High-Performance Multi-Component Polyurethane Sealant
Dymeric® 240 is a multi-component, chemically-curing, epoxidized polyurethane sealant specially formulated for dynamically moving building joints. Dymeric 240 is a non-sag, general purpose sealant providing flexible, long life, durable, weathertight seals for both new construction and renovation projects in many types of buildings.

For more information CLICK HERE

 

Dymonic® FC – Fast-Curing, Low-Modulus Hybrid Sealant
Dymonic® FC is a low-modulus, one-component, moisture-cure, polyurethane hybrid sealant formulated with proprietary silane end-capped polymer technology. Dymonic FC provides the best performance characteristics of polyurethane and silicone sealants. Dymonic FC is a durable, flexible sealant that offers excellent performance in moving joints and exhibits tenacious adhesion once fully cured. It is fast curing with a skin time of 60 minutes and a tack-free time of 3-4 hours to significantly reduce dirt pickup.

For more information CLICK HERE

 

EUCO 700

Semi-Rigid Industrial Floor Joint Filler.  EUCO 700 is a two component, semi-rigid epoxy for filling control and construction joints in industrial concrete floors This product supports the joint edges and reduces spalling of the edges caused by wheel traffic.

For technical data CLICK HERE
For MSDS CLICK HERE

 

EUCO QWIKJOINT UVR

EUCO QWIKJOINT UVR represents a new generation of polyurea technology with features and benefits unlike any other polyurea joint filler on the market. EUCO QWIKjoint UVR resists fading from ultraviolet light greater than any existing product on the market. It is a fast-setting, semi-rigid polyurea, primarily used for filling construction and control joints in industrial and commercial concrete floors. EUCO QWIKjoint UVR can be shaved flush with the floor shortly after placement or up to 24 hours later. EUCO QWIKjoint UVR supports and protects joint edges from heavy loads and wheel traffic, reducing spalling of the joint edges.

For technical data CLICK HERE
For MSDS part A CLICK HERE and for part B CLICK HERE

 

Roadware Inc. Concrete Repair Products
http://www.concretemender.com/rw80000.pdf

Great Application Videos

Epoxy Anchoring

 

Dural Fast Set Epoxy
Rapid Setting, High Strength, Epoxy Adhesive binder.  DURAL FAST SET EPOXY GEL AND LV are two part, 100% solids, moisture insensitive epoxy resin compounds available in pre-packaged single and dual component cartridge kits.

For technical data CLICK HERE
For MSDS

For Pull Out Load Testing Chart CLICK HERE

 

Dural 365 Polyester Resin 

Fast Setting, All-Weather Polyester Adhesive.  DURAL 365 is a fast setting, non-sag polyester doweling adhesive for concrete, masonry, brick, and stone applications. DURAL 365 has a high compressive modulus and strength, can be used in damp conditions, and can be installed at temperatures as low as 20°F (-7°C) and up to 120°F (49°C). In addition, DURAL 365 has a short bolt-up time of just one hour at 75°F (24°C).

For technical data CLICK HERE
For MSDS CLICK HERE


Dual Cartridge CHEMROC 800 Polyester Resin

  • Horizontal & overhead anchoring
  • High Strength – putty material
  • Dowels – underwater anchoring
  • Anchoring in non-uniform substrates
  • Architectural rehabilitation
  • Seismic anchoring
  • Cementing two unmatched surfaces
  • MTO approved

For more information CLICK HERE


SURE-ANCHOR I (J-51)

Sure-Anchor I (J-51) is a 100% solids, high-modulus, high-strength, epoxy gel adhesive. It is a two-component, moisture-insensitive structural epoxy adhesive that meets ASTM C-881 and it is listed by the ICC (formerly ICBO).

Purpose:
Sure-Anchor I (J-51) is ideal for anchoring bolts, dowels, and reinforcing steel in concrete. It is also ideal for vertical and horizontal structural bonding and patching. Sure-Anchor I (J-51) may be used to seal cracks and set injection ports prior to injection grouting.

 

 

Hardeners

SURFLEX

Non-Metallic Floor Hardener.  SURFLEX is a quartz-silica mixture of finely graded non-metallic aggregates, plasticizer and cement binder. It is an economical concrete floor hardener recommended for both interior and exterior use. It is particularly valuable because of its non-rusting characteristics when floors will be frequently wet. SURFLEX is available in eight non-fading colors as well as natural.

For technical data CLICK HERE
For MSDS CLICK HERE
For application guide CLICK HERE

Retarders

SpecEtch
A spray applied, chemical surface retarder specially engineered to expose the underlying aggregate of freshly place horizontal concrete.

For more information CLICK HERE

 

SpecFilm RTU
A ready to use evaporation retarder that is specifically designed to form a thin monomolecular film to reduce rapid moisture loss from the concrete surface prior to curing.  SpecFilm RTU reduces field issues with exposed concrete by minimizing plastic shrinkage cracks and surface crusting.

For more information CLICK HERE

 

Eucobar
Evaporation Retardant.  EUCOBAR is designed to be used as an evaporation retardant on concrete flatwork of all types.

For technical data CLICK HERE
For MSDS CLICK HERE

Sealers

Everclear VOX
Water-Based, Low VOC, Acrylic Sealer for Concrete.  EVERCLEAR VOX is a water based pure acrylic sealer for concrete with excellent blush resistance and total resistance to yellowing from UV exposure. This sealer imparts an attractive gloss and protection to all concrete surfaces, and is especially suited for decorative concrete. Formulated with a very low VOC content, EVERCLEAR VOX is compliant with all VOC regulations in the United States and Canada and its low odor makes is usable indoors or out.

For technical data CLICK HERE
For MSDS CLICK HERE


Diamond Clear VOX

Non-Yellowing Water Based Cure and Seal.  DIAMOND CLEAR VOX is water based acrylic polymer blend curing and sealing compound for freshly placed concrete.

For technical data CLICK HERE
For MSDS CLICK HERE


Super Diamond Clear TB

Non-yellowing, Low VOC, Exempt Solvent Based Concrete Curing Compound And Cure & Seal

SUPER DIAMOND CLEAR TB is a state-of-the-art concrete curing compound and cure & seal specially designed with a high solids formulation to provide the most efficient moisture retention for proper cement hydration and strength gain as well as protection from liquids, weathering and abrasion. SUPER DIAMOND CLEAR TB is particularly well suited for exterior architectural concrete where membrane yellowing is undesirable. SUPER DIAMOND CLEAR TB is formulated with a unique exempt solvent blend that gives this product all the performance benefits of traditional solvent based curing and sealing products while ensuring compliance with VOC laws in regulated areas

 

Cure & Seal WB

A water-based, VOC compliant acrylic polymer engineered to cure, seal, harden, and dust proof freshly placed concrete and improve the wearability and durability of aged concrete surfaces.  This low odor, water-based formulation is ideal for interior applications.   ASTM C – 309 Type 1, Class A & B

For more information CLICK HERE

 

Crystal Rez  –  A clear, dissipating resin-based water emulsion curing compound for use on freshly finished horizontal and vertical concrete surfaces.  Crystal Rez is formulated to provide an effective curing membrane that will dry to a clear (non-yellowing) membrane.  May contribute to LEEDS credits.  ASTM C–309, Type 1 and 1D, Class A & B; AASHTO M-148, Type 1, Class A & B

For more information CLICK HERE

If you have any questions about chemical and
powders, please contact us.

 

For over 30 Years, Richform Construction Supply has been number one for all your construction supplies in Vancouver, Burnaby, Coquitlam, Port Moody, Maple Ridge, Mission, Abbotsford, Chilliwack, Richmond, Surrey, Langley, White Rock, Delta, Squamish, Whistler, Vernon, Kelowna, Penticton, Kitimat and Fort St. John, BC.