Have a question?

Click the vest to contact us!

or give us a call at

1-(866) 400-5885



Euco-Speed MP is a rapid setting, very rapid hardening magnesium phosphate material for patching and repair of concrete and masonry surfaces. EUCO-SPEED MP requires only the addition of water and can be installed with standard tools, equipment and procedures. It bonds tenaciously to properly prepared concrete and provides a durable patch which is resistant to freeze/thaw cycling and deicing salts. For temperatures above 85oF (29oC), EUCO-SPEED MP Hot Weather should be used. For large placements use EUCO-SPEED MP HOT WEATHER extended with pea gravel.

EUCO-SPEED MP is available in 50 lb (22.7 kg) bags or pails. Yield: Approximately 0.42 ft3 (0.012 m3) of mortar when mixed with 0.45 gal (1.7 L) of water. For areas deeper than 1” (25.4 mm), EUCO-SPEED MP must be extended with up to 30 lb (13.6 kg) of 3/8” (9.5 mm) pea gravel*. Yield will increase to approximately 0.57 ft3 (0.016 m3) per unit.* Use only dust free, properly graded hard aggregate. Never extend EUCO-SPEED MP with limestone or aggregate containing limestone.

Trade name EUCO-SPEED MP


Clean-Up Procedures
Clean tools and equipment with water before the material hardens.

For over 30 Years, Richform Construction Supply has been number one for all your construction supplies in Vancouver, Burnaby, Coquitlam, Port Moody, Maple Ridge, Mission, Abbotsford, Chilliwack, Richmond, Surrey, Langley, White Rock, Delta, Squamish, Whistler, Vernon, Kelowna, Penticton, Kitimat and Fort St. John, BC.